Click this messge to hide it.
REPACKAGED PRODUCT: This repackaged timber product offers an opportunity to save money. Similar to an ex demo or seconds quality, all major components should be usable with no significant shortages. The packaging may not be in new condition and there may be signs of use or imperfections such as knots, shakes, weathering or filler. If the product or packaging is not as new we offer the product for sale as “repackaged”. We recommend painting or staining with careful preparation soon after assembly. Savings are calculated against the retail price of a new product as of 26th January 2026.
- Specifically designed for wheelie bin storage with no timber floor to provide easier access. Can be built on concrete, slabs or shingle.
- All timber treated with a light coloured preservative
- Easily painted in any other colour of your choice
- For best results a top coat is recommended soon after installation
- All timber construction with no chipboard, plywood, OSB or other man made boards or sheet materials
- Attractive slatted design features gaps to provide ventilation for hygienic reasons
- Unusually narrow gaps ensure an effective screen with an attractive overall appearance
- Side hinged front doors included with sliding bolts
- Top hinged lids with securing chains included
- Attractive horizontal timber slats to the front and both sides with narrow gaps
- Attractive horizontal timber slats to the lids with narrow gaps
- Timber diagonal bracing at the rear in lieu of slats to provide greater rigidity
- Ideally suited to a location against a wall or a substantial fence
- Reversible doors, can be hinged on either side to ensure maximum opening width, helps to ensure easier access in a tight corner
- 34mm wide black powder coated steel threshold with minimal upstand and pre drilled holes
- 60mm x 20mm main framing (ex 3" x 1")
- 60mm x 38mm central internal support posts (ex 3" x 1.5")
- 42mm x 20mm roof framing (ex 2" x 1")
- 48mm x 10mm slats to walls (ex 2")
- Side panels 805mm wide x 1140-1180mm high
- Doors 605mm wide x 1035mm high
- Accommodates standard 240 litre wheelie bins
- Also accommodates smaller 140 litre and 180 litre wheelie bins
- Does not accommodate 360 litre wheelie bins
- Clear opening width approximately 2'0" (600mm) per opening
- Clear opening height approximately 3'9" (1140mm)
- Overall depth approximately 2'8" (805mm)
- Overall width approximately 6'6" (1995mm)
- Overall height approximately 3'11" (1190mm)
- These wheelie bin stores are easy to deliver if access is restricted - all sections will pass through a normal single door
- Prefabricated panels makes installation easier
WHEELIE BIN SIZES: Our bin stores are designed to accommodate the standard 240 litre wheelie bins issued by councils around England, Scotland and Wales. These are normally very similar in design and size. Typically a 240 litre wheelie bin is around 1060mm high, 575mm wide and 730mm deep. Our bin stores will also accommodate smaller 140 litre and 180 litre wheelie bins, which are normally similar in height and around 75mm narrower. The 140 litre wheelie bin is only around 550mm deep and the 180 litre bin is around 740mm deep. However, our bin stores do not normally accommodate the larger 360 litre wheelie bins which are sometimes available, often on request. A 360 litre wheelie bin is normally within an inch of the standard height and width, but much deeper at around 875mm. If you want to check your wheelie bin, the storage capacity in litres is normally embossed on the lid. All sizes are approximate.










