Aluminium Greenhouse 032 - Green, Toughened Glass, Base Included

• 4mm toughened glass as standard
• Green powder coated aluminium greenhouse frame
• Green powder coated galvanized steel base plinth (makes installation easier)
• T-shaped glazing bars with a central upstand for greater strength and rigidity
• Full height glass where practical with large panes and fewer joins
• Profiled eaves beam with integral gutter
• The ridge beam features continuous horizontal grooves to retain the roof glazing more securely
• 12 triangular eaves corner plates, 3 per corner, to ensure maximum strength and rigidity
• 6 triangular ridge plates, 3 at the front and 3 at the rear to ensure maximum strength and rigidity
• Diagonal corner braces in every wall to provide greater structural rigidity
• Eaves struts at 2' centres reinforce the connection between the side walls and the roof
• Ridge struts at 2' centres reinforce the connection between each side of the roof
• 4 free opening roof vents
• Opening roof vents include manual openers with casement stays and pins
• Double sliding door
• Door handle included
• Door width 4'2" (1270mm)
• Door opening width 3'10" (1180mm)
• Door height approximately 6'9" (2050mm)

8'x10' greenhouse

• Width 8'5" (2575mm)
• Length 10'6" (3190mm)
• Eaves height including base plinth 5'5" (1660mm)
• Ridge height including base plinth 8'6" (2590mm)
• Overall weight 344kg

8'x12' greenhouse

• Width 8'5" (2575mm)
• Length 12'6" (3810mm)
• Eaves height including base plinth 5'5" (1660mm)
• Ridge height including base plinth 8'6" (2590mm)
• Overall weight 378kg

10'x12' greenhouse

• Width 10'1" (3065mm)
• Length 12'6" (3810mm)
• Eaves height including base plinth 4'6" (1365mm)
• Ridge height including base plinth 8'1" (2470mm)
• Overall weight 406kg

TOUGHENED GLASS: Toughened glass is the best glazing material for use in greenhouses. It is around 6 times stronger than normal glass so it is less likely to break and when it does break toughened glass breaks into harmless small pieces. This makes toughened glass the best option for all the family including children, pets and the elderly. Toughened glass also strengthens the frame and it is heavy which helps to resist wind. All glass supplied is 4mm thick toughened safety glass.

POWDER COATED ALUMINIUM: The powder coated finish is more attractive than the stark silver finish aluminium greenhouses. The tough finish also has excellent weathering properties and retains its gloss and colour superbly. A good example of powder coating is the finish on your washing machine. Powder coated aluminium greenhouses have a similar finish.

BASE PLINTH: The base plinth makes installation much easier. It is designed to be a portable and prefabricated foundation beam. The plinth features a flat underside to spread the weight of the greenhouse over a larger area. The base plinth can be placed on any flat and level surface including soil, gravel, decking, concrete or paving slabs. It is best to prepare a perimeter footing of concrete or paving slabs for the base plinth to stand on. However, with care the base plinth can be placed on any surface including soil or gravel provided that the ground is flat and level.

GREENHOUSE LOCATION: Ideally your greenhouse should have a clear space at least 18" wide on all sides, if possible. This ensures easy access for both installation and future maintenance. In reality this is often not practical and at many sites it is not needed. A reduced clearance is often possible on one or two sides. You should cut back or remove any nearby shrubs and trees. Remember to allow for future growth. Ideally the ridge of a greenhouse should run from east to west. The best position for a freestanding greenhouse is a sunny spot outside the shadow of nearby buildings and trees. A sheltered position is best otherwise additional screening may be advisable. Plants need plenty of water so your greenhouse should be close to a water supply and the site should be well drained.

SIZES - LENGTH AND WIDTH: The external wall sizes are listed alongside the price. The first dimension listed is the width and the second dimension is the length. The width refers to the angled gable walls at the front and rear including the door wall. The length refers to the side walls.

WE ARE PROUD TO DISPLAY A SIMILAR BUILDING: You can see a similar building to this one on display at our show centre in Norwich. Although it is not exactly the same model, it is a similar building made in the same factory to a similar specification using the same components. The display will give you a good impression of the overall quality of construction. With thousands of buildings on our website and only a few dozen on display, we only display our best value buildings. We chose to display this building because it is one of our favourite buildings. We know it will bear close scrutiny. If you are able to visit us you will see the quality for yourself. Our Show Centre is open 7 days a week with expert advisors always available.

• Staging
• Freestanding shelf units
• Louvred vents
• Automatic roof vent opener
• Automatic louvre opener
• Downpipe kits
• Base anchor kits
• Water butts
• Bubble insulation
• Automatic watering system
• Electric heaters
• Thermometers and soil gauges

GREENHOUSE ACCESSORIES - ALWAYS IN STOCK: As a specialist greenhouse supplier, established since 1981, we pride ourselves on supplying more options and accessories than other suppliers. All of our greenhouse accessories are always in stock all the time. Many accesories are only available when you buy the greenhouse and not available separately. However, we always make an exception for one of our customers - if you purchased your greenhouse from us we will always supply any accessory you need at any time, even many years afterwards.

BASE ANCHOR FIXING KITS - FOR SOIL OR CONCRETE: This kit makes it easy to fix your greenhouse down securely into concrete, paving slabs, decking or even soil. The brackets are profiled to grip the inside of the greenhouse base plinth with fixing holes on the inside. The brackets are fixed from inside the greenhouse with coach screws fixed down into the concrete, paving slabs or decking. If you want to site your greenhouse on soil you will need a concrete trench around the perimeter or smaller pockets of concrete into which the brackets can be fixed. You can fix the base plinth down with screws and wall plugs but it is much easier with our profiled brackets. Fixing the greenhouse down is recommended at all sites. The kit includes:

• Profiled anchor brackets - shaped to grip the inside of the greenhouse base plinth, with predrilled fixing holes
• Masonry drill bit - used to drill the correct size hole in concrete or paving slabs
• Zinc plated coachscrews - supplied complete with washers and plugs to ensure a neat easy fit

VENTILATION: Improved ventilation increases the air circulation through the greenhouse for better growing results. Automatic openers react to heat which ensures that in hot weather the vents open in your absence and then close again when its cooler. Louvred ventilators provide a healthy air flow through the greenhouse to ensure improved growing conditions and better crops. Some plants such as alpines require more ventilation than others. If you are not yet sure which plants you are likely to grow improved ventilation will give you more versatility.

HEATERS: We offer a huge range of heaters so whatever your specific requirements we have a heater to do the job. Our electric heaters require a standard domestic 13 amp electricity supply. Our propane gas heaters require permanent trickle ventilation when in use. As an approximate guide, a 3kw heater will heat a greenhouse up to 8'x12' or provide frost protection only up to 10'x15' in normal site conditions. A 1.5kw heater will normally heat a greenhouse up to 6'x8' or provide frost protection only up to 6'x12'. Internal partitions are often used in large greenhouses to create a smaller warm room which is cheaper and easier to heat.

HEATING REQUIREMENTS: Heating requirements vary for several reasons. Location is one factor with more heating required in Scotland than in southern England and less heating required in a sheltered position. The design is also a factor. For example, dwarf walls improve the insulation and lean to greenhouses absorb warmth from the existing wall. Another factor is the materials used. Polycarbonate greenhouses retain heat better than glass and wooden greenhouses retain heat better than metal greenhouses. We recommend you to buy a bigger heater than you need - you can always turn it down.

BUBBLE INSULATION: Bubble insulation helps to protect plants and reduces winter heating costs. The insulation is attached to the inside of the frame using retaining brackets. The brackets are easily fixed to the greenhouse frame and they hold the insulation securely in place. This product is quick and easy to fit the first time and even quicker subsequently. The pack includes insulation, retaining brackets and instructions.

POLYPROPYLENE FLOOR TILES: A durable polypropylene floor or footpath is an affordable alternative to slabs or concrete. Easy to install within a few minutes, these interlocking polypropylene pavers simply click together with no fixings needed. Unlike slabs or concrete these pavers are lightweight, easy to install and fully relocatable. Designed to spread weight, the finished floor is capable of supporting 36 tonnes per square metre. First the ground is levelled and then the pavers are laid directly on the soil. The pavers can also be laid on grass, sand or gravel. The finished floor or footpath is self draining and suitable for wheelbarrows and wheelchairs. It fits comfortably inside the greenhouse with a few inches to spare. The tiles are easily prised apart by folding so the floor is even quicker to remove if required.