Click this messge to hide it.
These easy to install timber decking tiles feature boards with a reeded surface finish and a narrow gap between each board to allow for expansion and contraction of the timber and drainage. Primarily a base, the narrow gaps make these tiles popular as a floor. If a smooth workshop floor is required you can lay matting, lino or thin boarding over the tiles. All timber is pressure treated, a lifetime preservative treatment. Unlike slabs or concrete these deck tiles are lightweight and fully relocatable. Each paver is 500x500mm (1'8"x1'8") and 32mm thick overall with 16mm thick boards, hand made with 6 boards 72mm wide, 5 gaps 13mm wide and 2 battens at 428mm (1'5") centres.
The pavers can be laid directly on concrete or paving. Otherwise the ground should be levelled and compacted and a 1-2" layer of pea shingle is recommended. The finished base is a few inches larger than your shed. No part of the shed is in direct contact with the ground and valuable items such as lawnmowers and steel tools are stored off the ground. This prolongs the life of your shed and the contents. Our optional fixing packs include suitable screws to fix the foundation rails of your shed firmly into the base. If your pavers are laid on concrete or paving we also recommend our optional hammer fixings.